Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
Artex ELT 345 406 Int With Whip Antenna
MFR Model# 8102
Overview
|
Note: Standard baud rate is 9600. Baud rate can be adjusted to match your GPS unit. If you require the baud rate to be 4800 for a portable GPS unit, please use special instructions during checkout. Take to the skies with confidence with the ELT 345. This emergency locator transmitter is equipped via NAV interface, so if you run into an emergency, search and rescue teams will be given your aircraft location in less than a minute, within 100 meters. In addition to providing position accuracy, the ELT 345 transmits on 406 MHz and 121.5 MHz frequencies. Like all our products, this ELT is built to surpass industry standards, and ensure you'll get the help you need. Be Prepared for the Unpredictable: - Manual and automatic activation - Two-wire remote switch - Flexible installation - Stainless steel mounting bracket - Built-in navigational interface When an emergency happens, rely on the same brand that leading aircraft manufacturers trust for first-class quality, superior technology, and outstanding customer service. The new ARTEX ELT 345 is built to the industry’s most stringent quality management standards to ensure the ELT works the first time, every time. The ARTEX ELT 345 transmits on 406 MHz and 121.5 MHz frequencies while providing positon accuracy thanks to the built-in GPS navigational interface. GPS data is embedded within the first emergency transmission and provides Search and Rescue personnel with the aircraft location, within 100 meters, in less than a minute. The ELT 345 boasts an industry low price for an ELT providing the same quality and performance on which the ARTEX brand was built. FAA TSO C126b approved. |
Installation
- The ARTEX ELT 345 can be activated manually (via cockpit remote switch or ELT switch) or automatically (the G-Switch senses a 2.3G or greater impact), and alerts the closest Search and Rescue agency of your emergency. The 406 MHz signal, containing your GPS coordinates, is transmitted to the Cospas-Sarsat satellites and relayed to the Mission Control Center where it is immediately routed to the nearest Search and Rescue agency. Your beacon’s registration will tell first responders who you are and the beacon itself lets them know where you are to within 100 meters. Finally, the local 121.5 MHz homing signal assists Search and Rescue forces to identify your exact location.
Specifications
Model: | ELT 345 |
|---|---|
Product Number: | 8102 |
Operating Frequencies: | 406.040 MHz (+/- 1kHz) - Emission Designator 16K0G1D / 121.5 MHz (+/- 6.075 kHz) - Emission Designator 3K20A3X |
Output Power: | 406 MHz: 5 W for 24 hours @ -20°C to +55°C, 121.5 MHz: 50 mW for 50 hours @ -20°C to +55°C |
Output Connector: | BNC Female |
GPS: | Built-in GPS Navigational Interface (NMEA 0183 or RS 232) |
Activation: | Automatic via G-Switch by 4.5 ft/sec (2.3 G) or Manual Activation |
Battery: | 6 year Lithium (LiMnO2), Replacement Battery Part No. 8322 |
Temperature Certified to: | Operating: -20°C to +55°C, Storage: -55°C to +85°C |
Self Test Checks: | G-Switch Enabled, 406 MHz and 121.5 MHz Power, NAV system, Low Battery |
Remote Control: | ON/ARM/TEST |
Weight (with tray): | 2.0 lbs (907.19 g) |
Measurements: | ELT Transmitter with mounting hardware installed: 6.40 (L) x 2.96 (H) x 3.78” (W) inches (16.26 x 7.52 x 9.60 cm) |
Approvals: | Cospas-Sarsat, FAA TSO, Industry Canada |
Antenna: | Black Whip Antenna (P/N: 8324) |
Mounting Tray and Strap: | P/N: 8323 (Universal mounting hole pattern fits 90% of existing ELT hole configurations) |
How it Works
- The ARTEX ELT 345 provides a quick-and-easy retrofit opportunity with flexible installation options such as a two-wire remote switch that does not require any aircraft power. Because it is a single output ELT, the ELT 345 utilizes the same RF output and only one coax cable to transmit both 406 MHz and 121.5 MHz signals. The built-in navigational interface does not require aircraft power to operate which greatly reduces the cost of installation. The stainless steel mounting bracket has a multiple-hole pattern configuration which makes the replacement of legacy ARTEX ELTs or old ACK, Kannad and AmeriKing ELTs quick and easy.
- Pair the ELT 345 with ARTEX’s exclusive online satellite confirmation testing system, 406Test.com, and get real-time beacon testing results, from the same satellites used by Search and Rescue, to ensure your ELT system is functioning properly. There is a reason that ARTEX ELTs are the choice of more aircraft manufacturers than any other; they trust ARTEX to build the highest quality products knowing they are used to save lives.
In The Box
- ELT 345
- Remote switch panel (Hookup wires not included)
- Whip antenna - Rated to 250 knots
- Coaxial cable
- Mounting tray
- Buzzer
- Battery
Reviews
Great inexpensive ELT with all the quality of the high end units. I replaced a very old ELT in my 1948 Navion A with the Artex ELT 345.
I love the ELT345s but I wish Artex would provide a DB connector for pins vs soldering. Users should absolutely be aware of the 50-second test period before the 406 signal goes active. One that 406 signal goes active, it could get real expensive if elicits a false alarm air search.
This is a high quality item and includes almost all the components youll need to install this ELT in your aircraft. For example, the antenna comes with its own coaxial cable and the D-sub connector comes with pins and a backshell housing. The only thing you need to supply is the tefzel wiring. One thing to be aware of with this unit is that it does not have an actual built-in GPS nav unit to give your position in case of emergency if you read the description carefully, youll see that it is ABLE to transmit a GPS signal, but that signal has to be provided by an outside source, like a panel-mount NAV GPS or a handheld unit. And you should make sure that you know what GPS you plan to use, as the signal output rate (Baud rate) needs to match with this unit. It can accept either Aviation Data format (9600 baud) or NMEA (4800 baud) and needs to be programmed into the ELT.
Easy install, unit came complete with pretty much everything needed. It tested ok. I hope I never need to find out if it works in a crash.
Had it in stock, quick shipping and great price. Meets my needs completely!
This ELT was a perfect replacement for my legacy ARTEX 121.5 in my PA-38 which had originally been relocated to the epanage from the center console by the previous owner . I had to order 12 ft of braided twisted pair milspec shielded wire to replace the existing wire in order to avoid any interference issues. The unit passed the testing and is up and running and the new whip antenna is just fine. All in all a great value!
We have installed many of these units! Very impressed with Artex and their development of this reasonably priced ELT for general aviation.
This is a replacement unit so I am in the process of installation. My impressions to date are that this is a solid product but there are a couple of things to be aware of: 1: the panel switch is significantly larger that my previous unit which means a panel modification not plug a play. 2: the unit comes with no wiring diagrams in the box you have to go to the web site an surf thru a 50 page document for the wiring diagram. 3: the antenna is atrocious there is no way I would put that on the exterior of my aircraft. Fortunately for me there is space under my Plex canopy that it will fit. 4: you need to be proficient in soldering din connectors.
FYI Sale of new 406Test subscriptions on 406test.com has been discontinued as of September 1st, 2023 you can no longer get test subscription after the purchase of this unit. Still a solid unit and I will highly recommend it.
Should provide instruction manual. Have to print 58 pages
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The Artex ELT 345 is a complete install kit. The only material not supplied is the two wires required between the ELT and the remote switch.
The ELT 345 requires connection to an external GPS source to receive GPS data.
No, the Artex 345 ELT uses a D-Sub connector and requires two wires from the ELT to the remote switch.
Yes, the GPS input only allows for more precise location information.
The whip antenna included with this 345 ELT antenna is rated for aircraft up to 250 Knots.
Yes, the USA models are programmed according to cospas-sarsat information. You are responsible to register the ELT with your tail number and contact information. Directions for registration are included.
Yes, the ELT 345 will require all new parts to be installed.
We have created the part number for the replacement battery for the ELT 345, it is 11-14134. See the 'Accessories' tab on the web page for current pricing and to add to your cart.
The Artex ELT 345 has a 6 year lithium battery.
A single shielded wire provides GPS data from a panel mount GPS source. For portable, please contact sales for a special order quote.
