Aircraft Spruce Australia
Melbourne, VIC Australia
Aircraft Spruce Australia- Wishlists
- +61 (1800) 953522
- Contact Us
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Thermo-Tec Thermo Shield Adhesive Backed Composite Tape 1-1/2 X 15 Ft Roll
MFR Model# 14002
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST. The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 deg F. |
Reviews
Good stuff
Verified Purchase
Thermo-Shield 1 1/2 X 15Foot Rll
Good stuff
Verified Purchase
Thermo-Shield 1 1/2 X 15Foot Rll
I used this to wrap my fuel flow transducer and was surprised by flexibility and the adhesion. I have had 2 premature failures of the transducer so it will be interesting to see if the thermal shield will solve the problem. So far, so good.
Works great... Used it on a fuel transducer for longer life in a hot cowling. Plenty of tape and sticks nice. Cuts with scissors.
I have used this tape to wrap my Nyla Flow pitot static lines that are too close to my cabin heat valve and it works great. I have also used this tape to wrap gaps around my heat ducting where I used the velcro thermo shield wrap. Definitely very sticky and adheres to itself nicely.
Q&A
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This product can protect parts from over 90% of radiant heat up to 2000 degrees F.
You would typically wrap the exhaust to keep the heat in. Something like the Thermo-tec Exhaust Insulating Wrap would work.
