Description | Part No. |
---|---|
A610M Flash Tube Assembly with Molex Connector | 11-03734 |
Whelen Strobe
Parts #2 Whelen Strobe Parts #3 |
Miss on the molex connector type, but was easy to de-pin and set new pins on the old connector. Great storbe lights!
Whelen A610M Strobe Tube Assembly - Molex Connector
Ordered the light with the molex connecter. Removed three screws securing the old light and installed the new light. Turned on the battery and beacon switch to check it out and no problem. It worked well and very bright.
Whelen A610M Strobe Tube Assembly - Molex Connector
Perfect size and fit!
Whelen said my completely dead strobes were due to a shorted tube. They walked me threw diagnosis. Sure enough, this strobe tube solved the problem and restored operation! This is one of the least expensive airplane fixes Ive had. A/S had it in stock and I was good to go in a couple days.
Easy modular design. Realized I needed a simple tool to compress the wire connection leads so I could feed it thru the wing tip assembly. Once I borrowed that tool, installation was easy. Nice and bright, again.
Perfect fit, great finish.
Item as described. Warp speed shipping
The Whelen A402R Red Optic Lens fit perfectly on my C-150 and at a comparably low price ($73). Delivery was fast as well.
Love it. Provides just the amount of spacing I needed.
Good quality product fair price fast shipping.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The light assemblies have the A441 connector. The mating connector is an A442 socket.
We have switched out the drawings for more clear and larger versions. We will be re-doing all of our Whelen Strobe Pages over the next few days to make it easier for the customer. Please look for these changes soon.
No, the W1285-2 is the base only, no wire pigtail.
The screw does not come with the part. You will need P/N# MS24693C26.
The only difference is the connector. The A610 has the standard connector, the A610-M has a Molex connector.
The wire lead length is approximately 7-5/8" from the assembly to the end of the molex connector.
The A610 assembly is our Part # 11-03213. If you keyword search 11-03213, you will locate the web page to order the assembly.
Everything in the photo is included.
Yes the "M" means that the molex connector is included.
Just the connectors at the end of the wire leads. A610 has the standard rectangle connector as seen in the first photo, and the A610m has the molex connector shown in the second photo.