This START PAC®’s maximum amperage output is 50 amps which is more than adequate for powering up various systems such as GPS and avionics programming. It is also an excellent choice for powering the aircraft’s maintenance equipment bypassing the aircraft battery and thus preserving it from unnecessary wear. This means that the on board aircraft battery is conserved for starting only. The environmentally responsible, low VOC powder coating protects the unit from wear, tear and poor weather conditions. |
Maximum Continuous Current output | 50 A |
---|---|
DC voltage output | 14.2 VDC |
AC voltage input | 90 - 240 VAC |
AC current input at maximum DC power output | 7 A @110VAC3.5 A @220VAC |
Phase | Single |
Forced air-cooling | Yes |
Over current protection | Yes |
Over voltage protection | Yes |
Over temperature protection | Yes |
Complete weightwith aircraft cables | 7lbs / 3kg |
DimensionsLength x Width x Height | 113/4″ x 5″ x 4″30 x 13 x 10 cm |
Maximum Continuous Current output | 50 A |
---|---|
DC voltage output | 28.5 VDC |
AC voltage input | 90 - 240 VAC |
AC current input at maximum DC power output | 14 A @110VAC7 A @220VAC |
Phase | Single |
Forced air-cooling | Yes |
Over current protection | Yes |
Over voltage protection | Yes |
Over temperature protection | Yes |
Complete weightwith aircraft cables | 10lbs / 4.5kg |
DimensionsLength x Width x Height | 14″ x 5.25″ x 5.5″36 x 13 x 14 cm |
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: Yes, the 53025 (24V) is the correct unit for the SR22 and the aircraft connector will fit.
This is a power supply that is not made for starting the aircraft. This Start Pac 53025 is used to power up the avionics while the aircraft is off.
This unit must be plugged into AC power 100-240 VAC, 11 amps.
This unit has no battery as it is used only when plugged in as a power supply. It does not jump start it will only power the aircraft to run avionics.
It has a standard 110v 3 prong plug.