The compact SunBeacon II is a direct replacement for the standard beacon. It is available in red or white, and in 12V or 24V. It is TSO C-96a Class II approved for white, TSO-C96a Class I and Class III approved for red. |
Beacon with 3.75 inch adapter fits 1965 C172 fin cap perfectly. Impressively bright, roughly one second flashes spaced roughly one second apart.
AeroLEDs Sunbeacon II Red FAA TSO 12V
Works awesome! Really bright.
AeroLEDs Sunbeacon II Red FAA TSO 12V
Low profile easy install and super bright ,even in day time .Great product.
AeroLEDs Sunbeacon II Red FAA TSO 12V
Works well! And user friendly easy to install
AeroLEDs Sunbeacon II Red FAA TSO 12V
Much brither than any other beacon.Easy to install.Together with the holder fits perfect on Pa28, no additional hols to make
AeroLEDs Sunbeacon II Red FAA TSO 12V
5starr
AeroLEDs Sunbeacon II Red FAA TSO 12V
Perfect little beacon, unbelievably bright and perfect for our TriPacer
AeroLEDs Sunbeacon II Red FAA TSO 12V
Works great and installation was a breeze.
AeroLEDs Sunbeacon II Red FAA TSO 12V
AeroLEDs Sunbeacon II Red FAA TSO 12V
All good.
AeroLEDs Sunbeacon II Red FAA TSO 12V
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: The dimensions are 2.5" L x 2.5" W x 1.6" H.
5 year warranty.
The installation instructions indicate the mouning bracket is sold separately.
Per AeroLEDs: the Sunbeacon II requires an adapter which is part number 11-13537
The flash rate is 41 flashes per minute.
No as it has a TSO approval. It will just need to be installed and signed off by an A&P mechanic.
The vendor recommends using the SunBeacon II kit mount 01-1096 (PN 11-13537).
Yes, you will want to purchase adapter part number 11-17387.
Peak of 9.2A at 14V | Peak of 4.6A at 28V
You would need the SunBeacon II Twist mount PN 01-1096 (our part number 11-13537.)