A pink translucent, 1 part air drying resin used for the first 2 or 3 coats to penetrate and seal the fabric weave and assure good adhesion. Also used to attach the finishing tapes and reinforcing patches. Brush on initial coat thinned 3:1 with reducer. Subsequent coats are thinned 3:1 with reducer and applied with a spray gun to avoid brush marks & cut application time. Available in tinted or untinted and in quart, gallon, or 5 gallon sized. Important Notice: All mixed paints are special order and are non-returnable. |
Poly-Fiber Poly-Brush Tinted Gallon
Haven’t used anything yet but fast shipping
Poly-Fiber Poly-Brush Tinted Quart
Poly-Fiber Poly-Brush Untinted Quart
Excellent product
Poly-Fiber Poly-Brush Tinted Gallon
I rebuilt a J-3 in my garage 40 years ago using the Polyfiber process. At the time, it was called Stitts Polyfiber after the inventor, Ray Stitts. It is a superior product. Other processes have come and gone since then. I no longer own that plane, but I know who does, and it’s still flying and it still shines like it did when I rebuilt it! If you are considering recovering an airplane yourself, buy the manual and read it through three times. Then, open it up and have it right there with you when you get started!
Poly-Fiber Poly-Brush Tinted Quart
Pleasant nose with hints of citrus, good legs, with a bit of a bitter aftertaste.
Poly-Fiber Poly-Brush Tinted Quart
I never did like the pink and with the untended. I can leave it clear or I can tint it with the polytone color I want.
Poly-Fiber Poly-Brush Untinted Gallon
Very good
Poly-Fiber Poly-Brush Tinted Quart
Poly-Fiber Poly-Brush Tinted Gallon
Great stuff
Poly-Fiber Poly-Brush Tinted Gallon
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Only available in clear or tinted. The tinted is only sold in a pinkish color.
Each of these products have a 4 year shelf life in closed containers.
Poly Brush is thinned 3 parts Poly Brush to one part reducer. There are two reducers available. R65-75 for applying it in lower temps, and RR8500 for applying it in higher temp environments. MEK can be used for cleaning surfaces and spray equipment.
Poly-spray is intended for use on fabric. I don't believe it will adhere to metals.
This is designed to be applied directly to fabric. We do not have any data supporting it's use with epoxied wood.
The Poly-Brush states that it will cover approximately 150 sq feet per gallon.