THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Poly-Fiber Rib Lace Reinforcing Tape 1/4-Inch

$93.23/Each
Price Includes GST
Quantity
Add to Wishlist
Part# 09-03500-1
MFR Model# 1-RT4

Overview

Only synthetic threads and rib lacing cords should be used with Dacron covering to insure uniform strength.

Type
Description
Yards/Spool
PN#
Reinforcing Tape
1/4" Wide
40
09-03500-1
3/8" Wide
60
09-03600-1
1/2" Wide
60
09-03700-1
  • Frequently Purchased With
  • Customers Also Viewed
  • Related Items

Reviews

It works perfectly. I see some say it wont stick. It does if you paint the area with a coat of polybrush first like the Stits Instructions state.

Wayne
March 19, 2021

Works well but I feel that this product is over priced.

Don
July 30, 2020

only needed 6 feet

Steven D
June 18, 2020

Just what I ordered

Kelsie
February 2, 2019

I did a 32 foot wingspan with flaps and tank bays, had like 4 foot left over, anymore and you,ll need a second roll of this high dollar stuff.

Mantle P
August 28, 2018

This is not a Poly Fiber problem, nor is it an issue with A/C Spruce. This is a 3M tape provided through and part listed in an STC. Yet the quality is terrible. I ordered 6 rolls. Costly. About 1/3 of each roll is unusable because 3m cant keep the glue on the tape. It appears the tape must roll in the adhesive process and hence the sticky stuff gets all over. Its a gummy mess and i end up just cutting these areas out. 3M should be held to a higher QC if they are supplying aircraft parts through an stc. Or Poly fiber should find another product.

Goodfriend A
January 16, 2021

Adhesive does not cover entire tape,and its coverage, and where the adhesive is located ,seems to vary roll to roll. Cant get a good look under the finishing tapes as a result. Expensive and poor quality control.

Elliott W
March 21, 2019

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What kind of adhesive is recommended for use with the Poly-Fiber Reinforcing tape?

This comes with a adhesive backing on the tape as it is a peel and stick.

Q: what exactly is this Poly Fiber reinforcing tape? Is it more Dacron fabric with an adhesive back?

It is a high tensile strength ribbon made from polyester.

Q: What is the thickness of the reinforcing tape in mils? I need this to calculate clearance on some fittings. Thank you.

It is currently 10.5 mils thick.