Poly-Fiber Poly-Brush Tinted Gallon | Aircraft Spruce Australia

+61 (1800) 953522 | info@aircraftspruce.com.au
Aircraft Spruce Australia
Melbourne, VIC Australia

THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | +61 (1800) 953522

Photo may represent series and not specific product

SHARE

Poly-Fiber Poly-Brush Tinted Gallon

18 Reviews 6 Answered Questions

$121.36/Gallon

Price Includes GST

Add to Wishlist View More In This Series →

Part# 09-04200
MFR Model# 2-PB4

Overview

A pink translucent, 1 part air drying resin used for the first 2 or 3 coats to penetrate and seal the fabric weave and assure good adhesion. Also used to attach the finishing tapes and reinforcing patches. Brush on initial coat thinned 3:1 with reducer. Subsequent coats are thinned 3:1 with reducer and applied with a spray gun to avoid brush marks & cut application time.
Available in tinted or untinted and in quart, gallon, or 5 gallon sized.

Important Notice: All mixed paints are special order and are non-returnable.

Frequently Purchased With
Customers Also Viewed

Reviews

Submit a Review

David N

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

August 13, 2024

Excellent product

Jean R

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

April 4, 2024

Stephen S

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

October 11, 2022

Great stuff

Joseph E

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

October 4, 2022

Great stuff!!

Joseph E

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

June 30, 2022

Stephen S

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

December 10, 2021

Jim E

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

October 27, 2021

Works well

Stephen S

Verified Purchase

Poly-Fiber Poly-Brush Tinted Gallon

June 19, 2021

good stuff

Gary H

January 4, 2021

Good product. Tried and true.

Rich C

November 20, 2020

I had a leaking can of Polybrush delivered and contacted customer support . They had a new can at my door in 4 days no charge . It was the first time in over 40 years of doing business with you that I had a problem ... Thanks , Ed

Edward S

August 17, 2020

great service box got here in great condition fast service

Jack B

January 10, 2020

First of all, I use this on model planes (R/C) using the lite Stits fabric. This is NOT the same stuff sold by F&M. Their Poly-Brush is already thinned, since they sell to modelers. Spruce sells the full-strength stuff that you have to thin (with reducer-I used RR8500-slow drying but the finish is smoooooth!) )on your own. You need to thin it 3 to 1 or else it goes on too thick and it orange peels. But, once you thin it, its just perfect! So, you may actually be getting more product for the money with this than with the pre-mix stuff.

Bruce C

October 31, 2019

I have used this product on a recent cover job and it did what it was supposed to do. Dont forget to thin 3:1 with their reducer. I like the poly-fiber system, just were a paint mask when working with it.

Paul

February 27, 2018

The first gallon of poly brush was damaged in shipping and leaked in the carton. When we notified Aircraft Spruce of the problem they sent me a replacement gallon. I appreciate there service for taking care of this issue.

Don L

August 21, 2020

Works good, came fast and was well packaged. Hazardous shipping is brutal though.

Kent

January 18, 2019

This stuff is great, makes a tough, attractive and nearly fireproof finished product, but it is toxic as heck so use protective equipment ALL THE TIME.

George

December 19, 2018

product was good but the can was so damaged in shipping that it was impossible to stir without a messy transfer to another can

K. G

May 3, 2019

Q&A

Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: In what colors is Poly Brush available? I see it is tinted.

Only available in clear or tinted. The tinted is only sold in a pinkish color.

Q: What is the shelf life of Poly tone, poly brush and the reducers?

Each of these products have a 4 year shelf life in closed containers.

Q: When you mention 3:1 reduced do you mean 3 parts PolyBrush to 1 part reducer ? Also, what is the recommended reducer for this product ? MEK ?

Poly Brush is thinned 3 parts Poly Brush to one part reducer. There are two reducers available. R65-75 for applying it in lower temps, and RR8500 for applying it in higher temp environments. MEK can be used for cleaning surfaces and spray equipment.

Q: Will Polyspray adhere to a standard etch primer on Aluminium please?

Poly-spray is intended for use on fabric. I don't believe it will adhere to metals.

Q: Can West Systems epoxy be used as a primer when applying this product to wood?

This is designed to be applied directly to fabric. We do not have any data supporting it's use with epoxied wood.

Q: How many square feet does 3 gallons of poly brush and 1 gallon of reducer cover if you only apply one coat?

The Poly-Brush states that it will cover approximately 150 sq feet per gallon.

View in Catalog

View in Catalog