**Note: Quart Kit is pictured** This white heavy duty chemical and solvent resistant amine cured primer from Stits is fast drying and corrosion inhibiting. It can be applied and cured to temperatures down to 35°F. Mixing ratio is 2 parts base, 1 part catalyst. Catalyst use: An amine resin in a solvent blend for use in EP-420 Epoxy Primer according to directions on the base component listing. Mixing ratio is 2 parts base, 1 part catalyst. Reducer use: A blend of solvents for use in EP-420 Epoxy Primer according to the directions in the base component listing. Reduce 50%. Stits Epoxy Primer Kit White includes EP-420 Epoxy Primer, EP-430 Epoxy Primer Catalyst, and E-500 Epoxy Reducer. Available in quart or gallon sized kits. Important Notice: All mixed paints are special order and are non-returnable. |
DESCRIPTION | P/N |
Qt. Kit (Yields 2.5 qts) Incl. catalyst & reducer | 09-00285 |
Gal. Kit (Ylds 2.5 Gal.) Incl. catalyst & reducer | 09-00438 |
Ep-420 White Epoxy Quart Kit
God material
Ep-420 White Epoxy Gallon Kit
good product.
Ep-420 White Epoxy Quart Kit
Ep-420 White Epoxy Quart Kit
As expected
Ep-420 White Epoxy Quart Kit
Ep-420 White Epoxy Quart Kit
Ive used EP 420 before on gear and flap well and it always holds up under fluids. Good product!
Ep-420 White Epoxy Quart Kit
I replenish this item every 6 mos or so and Aircraft Spruce service is terrific: always fast and efficient, so that I dont have to hold a perishable shelf life product in long term storage in my shop. I relay on Aircraft Spruce for a wide range of products and place orders 12 to 15 times a year for everything from avionics to hardware.
OK
Great service,and great product.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the Poly Fiber how to manual, one gallon of catalyzed, and reduced, material will cover 1000 sq ft, one coat.
The primer, part A, has a 4 year shelf life, and the catalyst, part B, has a 2 year shelf life, per the Poly Fiber How To Manual.
Yes, that will work.
No it can only be ordered in white or green.
Per the vendor, these are solvent based so the temp should not effect the product.
Per the Poly-Fiber manual, this is for metal surfaces.