Marvel-Schebler Carb. No. | OEM PN | Rebuilt PN | Overhaul PN |
---|---|---|---|
MA-4SPA™ | 10-3678-32 | 08-06326-1 | 08-06326 |
Customer will need to provide core for overhaul in the event our supplier does not have cores available to overhaul. Note: All Rebuilt & Overhauled Carb Purchases will be Charged an Additional fee for Core. |
Installed on Lycoming O-320 (64 Cherokee 140) and it ran incredible. No more hesitation and shudder from idle to full power, leaning procedures back to POH standards, and GPH in line with what a 320 should be. Idled low after install but after several heat cycles it was idling at 600 RPM, right where it should be.
10-3678-32 Rebuilt Marvel Schebler Carb
So far, so good. No leaks, engine starts good. Was surprised to learn that the studs for mounting carb heat box, do not come with the rebuilt carburetor. Information was that those studs are an airframe part. The only place the studs are illustrated is in the Engine IPC and they are attached to the carburetor, with a P/N. Not a problem. Removed studs from removed carburetor for use on this s/n. All good!
The rebuilt carburetor was promptly received and included gaskets. Most importantly the rebuilt carburetor performed perfectly. It solved a long term issue with the previous carburetor as verified by a recently installed engine monitor. Even though my old carburetor had been rebuilt some time ago it never did perform as well as expected. Purchasing an exchange carburetor with all the current updates and flow tested was a bargain. Core charge has already been returned.
The Product and quick delivery were fine However I am still awaiting my Core Credit.
Outstanding workmanship, swap out simple, everything was in Box !!!
OH carb arrived promptly, was correct. I returned the core and was credited promptly. Great service, competitive price.
Quick and easy ordering and prompt delivery. You helped this first-time carburetor buyer feel confident I had the right choice and shipped it immediately. Thanks.
A top quality rebuilt product.
Aircraft Spruce has the cheapest and most efficient carburetor exchange available. The new one came properly packaged with everything lock-tite and sealed as needed. Removing some of the screws to add accessories (carb temp, fuel metering, etc) were very difficult but good to know theyre not coming off.
Great carb and came with gaskets which is awesome
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Rebuilt units are torn down, and all parts are replaced to new spec. An overhauled unit is the unit torn down and only certain parts, not all, are replaced, but still inspected to new unit specs. The work is done by Marvel-Schebler.
Per the supplier: They will be shipped with an 8130 form which will include the EASA number on it.
Per the supplier: Rebuilt and overhauled MSA carburetors are supplied with the engine side mounting gasket. When the air box mounting gaskets are available, we include them. However, they are not always included.
When we receive a core, our returns department does a visual of the unit to make sure the unit is complete, and if it is, we credit the core back to the customer. Generally from the time we issue credit and the amount is funded back to the customers bank account is 5-7 days. The credit memo will have a note that states we are crediting the core amount, under the assumption the unit is in overhaul-able condition. Once the manufacturer receives the unit, it is fully dis-assembled and inspected. If a structural part of the unit is broken, housing, bowl, etc., the replacement cost will be billed to the customer at that time.
Yes, they are actually overhauled by Marvel and marketed as Tempest carb.
Yes that would be an acceptable core.
All MSA carbs come with a domestic 8130-3 included. Export 8130, if required, must be requested at checkout.
Overhauled units may have parts remain that meet tolerances, and Rebuilt units have all replaceable parts replaced with new, no matter if they are in tolerance.
The recommended TBO is 10 calendar years or at the TBO of the engine on which the carburetor is installed.
I believe the -1 is added because its overhauled by Tempest. If you need a 10-4894 carb then the 10-4894-1 would be correct.