The compact SunBeacon II is a direct replacement for the standard beacon. It is available in red or white, and in 12V or 24V. It is TSO C-96a Class II approved for white, TSO-C96a Class I and Class III approved for red. |
Very bright replacement for my old Grimes beacon! I had to make a plate to cover the hole from the Grimes, and installed this on the plate.
AeroLEDs Sunbeacon II Red FAA TSO 24V
Super bright. Just don’t forget to purchase the mounting base.
AeroLEDs Sunbeacon II Red FAA TSO 24V
Great product Ive used these on several aircraft. Best in its class by far!
AeroLEDs Sunbeacon II Red FAA TSO 24V
very bright, easily seen at a distance in daylight. Works well with the Aerolight wingtip strobes using a sync wire.
Superbly fabricated hardware. Super bright beacon. Very pleased with this product. Just kills me how expensive the FAA makes it for anything to be certified.
Talk about bright - I can see it reflecting off my tires during taxi in daytime!!! Installation brochure warned mechanics not to look directly at it, without welding glasses! My 172A can be seen NOW.
Bought this at Oshkosh last summer and installed on the Skywagon. Flown 50+ hours since then, largely at night. Sunbeacon is an apt name. You *will* get spots in your eyes if you look at it, even in daylight! Draws hardly any current, plus it got rid of that annoying siren whine from the previous xenon strobe. It looks appropriate for a 50s-era Cessna, yet modern. And its visible from far, far away. There is a sync wire so you can mount one top and bottom side for even more visibility - I plan to install another at some point. Great product!
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the supplier: The dimensions are 2.5" L x 2.5" W x 1.6" H.
5 year warranty.
The installation instructions indicate the mouning bracket is sold separately.
Per AeroLEDs: the Sunbeacon II requires an adapter which is part number 11-13537
The flash rate is 41 flashes per minute.
No as it has a TSO approval. It will just need to be installed and signed off by an A&P mechanic.
The vendor recommends using the SunBeacon II kit mount 01-1096 (PN 11-13537).
Yes, you will want to purchase adapter part number 11-17387.
Peak of 9.2A at 14V | Peak of 4.6A at 28V
You would need the SunBeacon II Twist mount PN 01-1096 (our part number 11-13537.)