MIL No. | Otto No. | Description | Part Number |
---|---|---|---|
MS25089-1CR | P1-32121 | Threaded Bezel, Red | 11-00748 |
The P1 is a sealed, dustproof, snap action, military grade switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.
MIL qualified. Dustproof, snap action, screw terminals, rugged reliable construction.
|
P1 Momen. Switch P1-32121 Red
These look to be a great improvement over the micro switches that are being replaced. I really appreciated the outstanding customer service provided.
P1 Momen. Switch P1-32121 Red
Built like a tank! Should last for years. A little bigger then you might think.
P1 Momen. Switch P1-32121 Red
Excellent Built Robust Switch. I used it for a autopilot disconnect switch on a Dynon Skyview install. I like that the wires attach by screws with lock washers. It comes with everything needed to attach switch and wires.
P1 Momen. Switch P1-32121 Red
Very nice switch but turned out to be too large. Returned.
P1 Momen. Switch P1-32121 Red
Substantial “click’ when pressed lets me know it is working. Well built switch!
P1 Momen. Switch P1-32121 Red
As expected...quality part. Includes the tiny screws as well
P1 Momen. Switch P1-32121 Red
Solid PTT switch with a good responsive feel.
P1 Momen. Switch P1-32121 Red
Switch is excellent quality, but I decided 4 lb force was too high after trying it. I subsequently bought a 2.5 lb force version from another source since you dont offer it. Its much better as a GA PTT.
Excellent quality. Love that there is positive feedback when switch is pushed. It requires a bit more push than the old switch, but not bothersome. Wish the attachment had slightly larger screws and connectors. Instead, we soldered the wires to the two terminals.
Please note, Aircraft Spruce Australia's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce Australia assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The diameter size of the button press fit body is 9/16"(.562") and the button is red while the body is black.
Momentary means you have to hold the switch down to activate it. As soon as you release the switch it turns off. Press fit means that there are no threads and simply pushes into an exact size hole. SPDT means single pole double throw. This is a switch that only has a single input and can connect to and switch between 2 outputs.
No, this switch can be wired in either direction.
The switch has screw terminals. Included with the switch are screws, lockwashers, and solder lugs.
No, this should work fine in a 14 volt system.
.625 minimum.